Ignition Coil 12627120/099700182 UF680
IGNX No: STIC4121
OE No.:
12627120
099700182
SMP :
Inquiry Now >>
UF-680 (UF680)
Product Detail
| ST NO. | Brand | OEM No. | Model(s) & Years | PINS | MODULE |
| STIC4121 | BUICK | 12627120 099700182 |
BUICK ENVISION 2.0 / 2.5L (2016-2017) BUICK REGAL 2.0L (2014-2017) | 4 PINS | WITH |
| CADILLAC | 12627120 099700182 |
CADILLAC ATS 2.0/2.5L (2013-2018) CADILLAC CT6 2.0/2.5L (2013-2018) | 4 PINS | WITH | |
| CHEVROLET | 12627120 099700182 |
CHEVROLET MALIBU 2.0/2.5L (2013-2018) CHEVROLET CAMARO 2.0-2.5L (2016-2017) | 4 PINS | WITH | |
| GMC | 12627120 099700182 |
GMC CANYON 2.5L (2015-2017) | 4 PINS | WITH |
This Buick / Cadillac / Chevrolet / GMC ignition coil is supplied for the listed OE numbers 12627120 and 099700182. It features a 4 pins connector and with-module configuration, so connector layout, module structure, housing profile, and mounting details are useful reference points when reviewing a replacement product.
During product comparison, buyers can review the listed OE number together with connector orientation, terminal layout, plug direction, coil body shape, mounting position, and overall dimensions of the original part. Checking several structural details together provides a clearer basis for confirmation than judging the coil by appearance alone.
Connector and Module Details to Review
Listed OE Numbers
Check 12627120 or 099700182 against the original part during quotation, sample review, catalog preparation, or order confirmation. The OE reference can be considered together with the physical coil structure.
4 Pins Connector
The 4 pins connector is an important visible matching point. Terminal arrangement, connector shape, locking position, plug direction, and installation orientation can be compared with the original ignition coil.
With Module Configuration
This ignition coil is listed as with module. Module configuration can be reviewed together with connector and housing details when confirming the required replacement structure.
Electrical Construction and Condition Checks
Ignition coil operation is related to the primary and secondary windings, internal insulation, terminals, electrical connections, and control-related components within the coil assembly. During product evaluation, these areas can be considered together with connector fit, housing condition, and installation dimensions.
Engine heat, temperature changes, vibration, and repeated electrical loading are common operating conditions for ignition components. Depending on the buyer's inspection requirements, evaluation may include terminal and connector condition, housing and assembly condition, insulation-related characteristics, and relevant electrical measurements.
Sample and Order Specification Review
During sample evaluation, the replacement coil can be compared with the original part for the listed OE number, 4 pins connector, with-module structure, connector orientation, housing profile, and mounting details. Original coil photos or connector close-ups can also provide additional reference when further comparison is required.
For regular purchasing, the approved product structure can be used as a reference for later order communication. Packaging method, label information, required quantity, and other project-specific details can be reviewed according to the buyer's purchasing requirements.
Related Products
