Replacement Ignition Coil 273002E000 UF651
IGNX No: STIC2002
OE No.:
273002E000
SMP :
Inquiry Now >>
UF-651 (UF651)
Product Detail
| ST NO. | Brand | OEM No. | Model(s) & Years | PINS | MODULE |
| STIC2002 | HYUNDAI | 273002E000 | HYUNDAI TRAJET 2.0L (2003-2008) HYUNDAI ELANTRA 2.0L (2000-2011) HYUNDAI SONATA 2.0L (2005-/) HYUNDAI TUCSON 2.0L (2004-2010) HYUNDAI i30 2.0L (2007-2013) HYUNDAI TIBURON 2.0L (2006-2008) HYUNDAI ix35 2.0L (2010-/) HYUNDAI i40 2.0L (2011-/) |
2 PINS | WITHOUT |
This Hyundai ignition coil is supplied for the listed OE number 273002E000. It uses a 2 pins connector and without-module configuration for replacement requirements using this type of ignition coil structure.
When reviewing the product, buyers can compare the OE number with the connector shape, terminal position, plug direction, housing profile, mounting arrangement, and overall dimensions of the original coil. Checking several structural details together provides a more complete basis for matching than relying on product appearance alone.
Key Matching Details Before Ordering
Listed OE Number
Check 273002E000 against the original part during quotation, sample review, catalog preparation, or order confirmation. The OE number can be considered together with the physical structure of the coil.
2 Pins Connector
The 2 pins connector is one of the main visible matching points. Connector form, terminal layout, locking position, plug direction, and installation angle can be compared with the original ignition coil.
Without Module Structure
This ignition coil is listed as without module. Module status can be reviewed together with the connector, housing shape, and mounting arrangement when comparing the replacement part.
Winding, Insulation and Electrical Inspection
Ignition coil operation is related to the primary and secondary windings, internal insulation, terminals, and electrical connections. During replacement-product evaluation, these areas can be considered together with connector fit, housing condition, and installation dimensions.
Temperature changes, vibration, and repeated electrical loading are common conditions around the engine. Depending on the buyer's inspection requirements, checking may include housing condition, connector and terminal contact, insulation-related characteristics, assembly condition, and relevant electrical measurements.
Product and Ignition System Check
When a replacement coil is being selected, the condition of related ignition components can also be considered. Spark plug condition, plug gap, wiring, connector contact, and electrical supply may be relevant when checking starting, idling, hesitation, or misfire-related symptoms.
Before installation or sample approval, compare the replacement coil with the original part for the listed OE number, 2 pins connector, without-module structure, connector orientation, housing shape, and mounting details. Original coil photos or connector close-ups can also be provided if additional visual comparison is required.
Related Products
