Ignition Coil 2730122600/2730122610 UF308
IGNX No: STIC2040
OE No.:
2730122600
2730122610
SMP :
Inquiry Now >>
UF-308 (UF308)
Product Detail
| ST NO. | Brand | OEM No. | Model(s) & Years | PINS | MODULE |
| STIC2040 | HYUNDAI | 2730122600 2730122610 |
HYUNDAI ACCENT 1.3L / 1.5L (2000-2005) HYUNDAI GETZ 1.3L (2002-2009) |
4 PINS | WITHOUT |
This Hyundai ignition coil is supplied for the listed OE numbers 2730122600 and 2730122610. It uses a 4 pins connector and without-module configuration, which should be considered together with the physical coil structure when reviewing a replacement product.
For product comparison, buyers can review the OE number, connector form, terminal layout, plug direction, housing profile, mounting arrangement, and overall dimensions against the original coil. Checking several structural details together is more useful than relying only on a similar external appearance.
Structure Details to Confirm
Listed OE Numbers
Check 2730122600 or 2730122610 against the original part when preparing a quotation, reviewing a sample, or confirming catalog information. The OE reference can be checked together with the physical design of the coil.
4 Pins Connector
The 4 pins connector is an important matching feature. Connector shape, terminal arrangement, locking position, plug direction, and installation orientation can be compared with the removed coil.
Without Module Configuration
This ignition coil is listed as without module. Module status can be reviewed together with the connector, housing shape, and mounting structure when confirming the required coil configuration.
Electrical Construction and Working Conditions
The working condition of an ignition coil is related to its primary and secondary windings, internal insulation, terminals, and electrical connections. During product evaluation, these areas can be considered together with connector fit, housing condition, and installation dimensions.
Ignition coils operate around engine heat, temperature changes, vibration, and repeated electrical loading. Depending on the buyer's inspection requirements, evaluation may include connector and terminal condition, housing and assembly condition, insulation-related characteristics, and relevant electrical measurements.
Checks Before Installation
Before installation, the replacement coil can be compared with the original part for the listed OE number, 4 pins connector, without-module structure, connector orientation, housing shape, and mounting details. The connector and mounting area can also be checked for visible damage, contamination, or poor contact.
If the coil is being replaced during diagnosis of an ignition-related problem, spark plug condition, plug gap, wiring, and connector contact can also be reviewed as part of the ignition-system check. Installation and related inspection should follow the applicable vehicle service requirements.
Related Products
