Ignition Coil 9023781/96875090 UF851
IGNX No: STIC4106
OE No.:
9023781
96875090
A1050700439
SMP :
Inquiry Now >>
UF-851 (UF851)
Product Detail
| ST NO. | Brand | OEM No. | Model(s) & Years | PINS | MODULE |
| STIC4106 | CHEVROLET | 9023781 96875090 A1050700439 |
CHEVROLET SPARK 1.0L / 1.2L (2010-2015) CHEVROLET MATIZ 1.0 / 1.2L (2010) |
3 PINS | WITHOUT |
This Chevrolet ignition coil is supplied for the listed OE numbers 9023781, 96875090, and A1050700439. It uses a 3 pins connector and without-module configuration, so connector layout, housing profile, mounting arrangement, and overall coil structure are useful points to review when confirming the required replacement product.
Because several OE references are listed for this coil, buyers can compare the applicable number together with connector orientation, terminal position, plug direction, housing shape, mounting details, and overall dimensions of the original part. Reviewing several physical characteristics together provides a clearer basis for confirmation than relying on one identifier or exterior appearance alone.
Product Matching and Interface Check
Listed OE References
Confirm the applicable listed OE number against the original component during sample review, quotation, catalog preparation, or order confirmation. The OE reference can be checked together with the physical structure of the coil.
3 Pins Connector
The 3 pins connector is an important visible matching point. Connector shape, terminal arrangement, locking position, plug direction, and installation orientation can be compared with the original ignition coil.
Without Module Structure
This ignition coil is listed as without module. Module status can be reviewed together with connector configuration, housing design, and mounting structure when confirming the required replacement specification.
Electrical Construction and Inspection Focus
Ignition coil operation is related to the primary and secondary windings, internal insulation, terminals, and electrical connections. During product evaluation, these areas can be considered together with connector fit, housing condition, mounting dimensions, and general assembly condition.
Engine heat, repeated temperature changes, vibration, and electrical loading are common working conditions around ignition components. Depending on the buyer's inspection requirements, checking may include terminal contact, connector condition, housing integrity, insulation-related characteristics, and relevant electrical measurements.
Sample and Batch Specification Review
During sample evaluation, the replacement coil can be compared with the original part for the applicable OE number, 3 pins connector, without-module structure, connector orientation, housing profile, and mounting details. Original coil photos or connector close-ups can provide additional reference when further confirmation is required.
For repeat or batch purchasing, the approved sample can serve as a reference for connector configuration, visible assembly details, labeling, and packaging requirements. Any order-specific specifications can then be reviewed according to the actual purchasing project.
Related Products
