Ignition Coil 4606869AA/4606869AB UF502
IGNX No: STIC4806
OE No.:
4606869AA
4606869AB
4606869AC
SMP :
Inquiry Now >>
UF-502 (UF502)
Product Detail
| ST NO. | Brand | OEM No. | Model(s) & Years | PINS | MODULE |
| STIC4806 | CHRYSLER | 4606869AA 4606869AB 4606869AC |
CHRYSLER 300 C 2.7L / 3.5L V6 (2004-2012) CHRYSLER PACIFICA 3.5L (2003-2006) CHRYSLER SEBRING 2.7L (2007-2010) CHRYSLER CIRRUS 2.7L / 3.5L (2006-2010) |
3 PINS | WITHOUT |
| DODGE | 4606869AA 4606869AB 4606869AC |
DODGE AVENGER 2.7L V6 (2007-) DODGE CHARGER 2.7L / 3.5L V6 (2005-2010) |
3 PINS | WITHOUT |
This Chrysler / Dodge ignition coil is supplied for the listed OE numbers 4606869AA, 4606869AB, and 4606869AC. It uses a 3 pins connector and without-module configuration, so connector layout, housing profile, mounting arrangement, and overall coil structure are useful points to review during replacement-product selection.
When comparing the coil with the original part, buyers can review the applicable OE number together with connector orientation, terminal position, plug direction, housing shape, mounting details, and overall dimensions. Checking several physical features together provides a clearer reference than relying only on the product appearance.
Product Matching and Interface Check
Listed OE Numbers
Check 4606869AA, 4606869AB, or 4606869AC against the original component during sample review, catalog preparation, quotation, or order confirmation. The OE reference can be considered together with the physical coil design.
3 Pins Connector
The 3 pins connector is an important visible matching point. Connector shape, terminal arrangement, locking position, plug direction, and installation orientation can be compared with the original ignition coil.
Without Module Structure
This ignition coil is listed as without module. Module status can be checked together with connector layout, housing design, and mounting structure when confirming the required product configuration.
Electrical Construction and Inspection Focus
Ignition coil operation is related to the primary and secondary windings, internal insulation, terminals, and electrical connections. During product evaluation, these areas can be considered together with connector fit, housing condition, mounting dimensions, and general assembly condition.
Engine heat, repeated temperature changes, vibration, and electrical loading are common conditions around ignition components. Depending on the inspection requirements, evaluation may include terminal contact, connector condition, housing integrity, insulation-related characteristics, and relevant electrical measurements.
Sample and Batch Specification Confirmation
For sample evaluation, the replacement coil can be compared with the original part for the applicable OE number, 3 pins connector, without-module structure, connector orientation, housing profile, and mounting details. Original coil photos or connector close-ups can provide additional reference when further visual confirmation is needed.
Once the sample structure has been confirmed, it can be used as a reference for subsequent purchasing communication. Packaging method, label information, order quantity, and other project-specific specifications can then be reviewed according to the actual order requirements.
Related Products
