Ignition Coil 9004852056/9004852057
IGNX No: STIC1803
OE No.:
Inquiry Now >>
9004852057
9004852060
9004852110
9004852059
9004852066
9004852056
9004852076
9004852090
Product Detail
| ST NO. | Brand | OEM No. | Model(s) & Years | PINS | MODULE |
| STIC1803 | DAIHATSU | 9004852057 9004852060 9004852110 9004852059 9004852066 9004852056 9004852076 9004852090 |
DAIHATSU CUORE 0.8L (1990-1994) | 3 PINS | WITHOUT |
This Daihatsu ignition coil is supplied for the listed OE numbers 9004852057, 9004852060, 9004852110, 9004852059, 9004852066, 9004852056, 9004852076, and 9004852090. It uses a 3 pins connector and without-module configuration, so the electrical interface, housing profile, and mounting arrangement are useful points to review when confirming the required replacement coil.
Because several OE references are listed for this product, buyers can compare the applicable number together with connector orientation, terminal position, plug direction, housing shape, mounting details, and overall dimensions of the original coil. Reviewing several matching points together provides a clearer basis for confirmation than relying on one identifier alone.
Product Matching and Interface Check
Listed OE Reference
Confirm the applicable listed OE number against the original component during sample review, quotation, catalog preparation, or order confirmation. The number can be checked together with the physical coil structure.
3 Pins Connector
The 3 pins connector is an important visible matching feature. Connector shape, terminal arrangement, locking position, plug direction, and installation orientation can be compared with the original ignition coil.
Without Module Structure
This ignition coil is listed as without module. Module status can be reviewed together with connector layout, housing design, and mounting structure when confirming the required product configuration.
Electrical Construction and Inspection Focus
Ignition coil operation is related to the condition of the primary and secondary windings, internal insulation, terminals, and electrical connections. During product evaluation, these areas can be considered together with connector fit, housing condition, mounting dimensions, and general assembly condition.
Engine heat, temperature changes, vibration, and repeated electrical loading are common operating conditions around ignition components. Depending on the buyer's inspection requirements, evaluation may include terminal contact, connector condition, housing integrity, insulation-related characteristics, and relevant electrical measurements.
Sample and Batch Specification Review
During sample evaluation, the replacement coil can be compared with the original part for the applicable OE number, 3 pins connector, without-module structure, connector orientation, housing profile, and mounting details. Original coil photos or connector close-ups can provide additional reference when further visual confirmation is required.
For repeat or batch purchasing, the approved sample can be retained as a reference for product structure, connector configuration, visible assembly details, labeling, and packaging requirements. Any project-specific specifications can then be reviewed before subsequent order arrangements.
Related Products
