Ignition Coil 9004852109000/9004852109
IGNX No: STIC1802
OE No.:
Inquiry Now >>
9004852109
9004852109000
Product Detail
| ST NO. | Brand | OEM No. | Model(s) & Years | PINS | MODULE |
| STIC1802 | DAIHATSU | 9004852109 9004852109000 |
DAIHATSU SPORTRAK 1.6L (1988-1999) DAIHATSU CHARADE 1.0L / 1.3L (1987-1999) DAIHATSU CUORE 0.8L (1985-1998) DAIHATSU MOVE 0.8L (1996-2002) DAIHATSU HIJET 1.3L (1998-/) |
3 PINS | WITHOUT |
This Daihatsu ignition coil is supplied for the listed OE numbers 9004852109 and 9004852109000. It uses a 3 pins connector and without-module configuration, so the electrical interface, housing profile, mounting arrangement, and overall coil structure are useful points to review when confirming the required replacement product.
During product comparison, buyers can review the applicable OE number together with connector orientation, terminal position, plug direction, housing shape, mounting details, and overall dimensions of the original coil. Checking several physical details together provides a clearer basis for confirmation than relying on the OE reference or exterior appearance alone.
Product Matching and Interface Check
Listed OE Numbers
Check 9004852109 or 9004852109000 against the original component during sample review, catalog preparation, quotation, or order confirmation. The OE reference can be reviewed together with the physical structure of the coil.
3 Pins Connector
The 3 pins connector is an important visible matching point. Connector shape, terminal arrangement, locking position, plug direction, and installation orientation can be compared with the original ignition coil.
Without Module Structure
This ignition coil is listed as without module. Module status can be checked together with connector layout, housing design, and mounting structure when confirming the required replacement configuration.
Electrical Construction and Operating Conditions
Ignition coil operation is related to the condition of the primary and secondary windings, internal insulation, terminals, and electrical connections. During product evaluation, these areas can be considered together with connector fit, housing condition, mounting dimensions, and general assembly condition.
Engine heat, repeated temperature changes, vibration, and electrical loading are common conditions around ignition components. Depending on the buyer's inspection requirements, evaluation may include terminal contact, connector condition, housing integrity, insulation-related characteristics, and relevant electrical measurements.
Sample and Batch Specification Review
During sample evaluation, the replacement coil can be compared with the original part for the applicable OE number, 3 pins connector, without-module structure, connector orientation, housing profile, and mounting details. Original coil photos or connector close-ups can provide additional reference when further visual confirmation is required.
For repeat or batch purchasing, the approved sample can be retained as a reference for product structure, connector configuration, visible assembly details, labeling, and packaging requirements. Any project-specific specifications can then be reviewed before subsequent order arrangements.
Related Products
